Latest Hardware Love Letter - Canon Pixma Pro 100 Printer

My love affair with tech is frequently at odds with my impulse to keep rooted in the materials of my childhood (and, history up to now). There are uses for both. There's efficiency to be gained in digital, and there's joyful play that goes with using real-world materials. I still prefer and approach to my work that balances the two, and gives me the best aspects of each: the speed and power digital layouts/pencils, and the natural textures and fun of traditional inks (and sometimes paints). In order to bridge the gap between my Cintiq Companion and my bristol board, I needed another tool; a quality large format printer. I did a good bit of research, and I've found one that not only fits the bill for comics bluelines, but a whole host of other applications (art prints, photos, last-minute valentines)- and in my use, it does it all while beating the competition senseless from a quality/value standpoint. Here it is: Swoon.

This is the Canon Pixma Pro 100. It's Canon's entry-level professional color printer, it's beastly big/heavy, and built like a tank compared to the consumer printers I've used. I'll get into what it does well in a minute, but first I'll tell you something about my prior experiences using large-format printers. Then you shall fully understand my joy.

I've used a number of large format printers from HP, Brother, and the like (and by large format, I don't mean gigantic, roll-out-a-banner size, just something with at least 11"x17" capabilities). They've all been consumer-grade, and serviceable with some coaxing. One that comics people recommended frequently for its multi-functionality is the Brother MFC J6710dw. For about $150, you get an 11"x17" scanner, printer, fax (right?), creature-feature. We have one in my studio, and I've used it a number of times to print my digital bluelines onto bristol.

We are not friends, you and I.

Here's the thing: in the mid-to-late nineties, my parents got one of these MFC things from another manufacturer, and it just did nothing well. It had constant problems, and at that time, I swore I'd never buy an MFC device. After using the newer Brother in my studio, my opinion is largely unchanged. It does produce decent blueline prints, but with enormous caveats: after only a few friendly encounters, I found it had trouble taking a single page of bristol (you have to hand-guide the paper onto the sensor, do a holy cross, close your eyes, and count to ten- and even then, it may spit the board out, or give you lip about how there's nothing there). Even when it does finally print something, it may print the image slightly crooked on the page- not a big deal for print art production, but it sure doesn't make originals look their best. In short, I found all the efficiency gained in digital layouts and pencils squandered by constant printer battles. I sometimes spent an hour, hour and a half trying to get ten pages printed. I'm not kidding. I could have had another hand-penciled page mostly done in that time. RE-DONK-U-LOUS! My experiences with our older HP deskjet were largely the same- lots of time wasted trying to get a good print.

So where do you go from there? Large-format-capable pro grade printers, even entry-level ones, typically start at about $500. Ouch. Would I eventually make that up if I didn't have to waste time battling the device? Sure, but I am my father's son, and can't help but find a deal. This is freelance art, after all. Some days I get offers from joe average that let me pay two weeks of bills in a day, and other days I get offers from major publications to do art for less than I pay my babysitter. Finding a good deal on your tools is important.

Enter the Pro 100. One of the delightful things about this printer is that it's almost always available with a huge rebate from Canon. If you go to Adorama, for example, you can typically find it for under 90 bucks after the $300 mail-in-rebate, including a nice stack of 13"x19" photo-paper. It's crazy.

Here's what's even crazier. We all know that manufacturers price their printers to make their real money from ink and toner sales. This model is no exception, with a full set of 8 cartridges running about $100. Double-ouch, especially considering how much ink you use on just 5-10 13"x19" high-quality prints (the answer is most of it). Granted, blue-line prints are nowhere near that thirsty, so you'll get far more pages out of the ink set before you need a refill. BUT. The secret to getting huge value out of this printer is using refillable inks from a third party manufacturer. Note, I'm always very leery of non-name-brand inks, and you should be too. They'll often yield less, clog more, and give you worse color. I did a lot of research on this, and found a supplier called Precision Colors that a bunch of pro photographers love (I think I found a few discussions on DPReview, among others). Their system is certainly more work intensive than just buying a new set of cartridges, but having done it myself now, it's really very easy if you follow their instructions and have a few tools around the house. I also love that I don't have to throw away so much plastic.

Squeezy caps make for cleaner refills.

The set I bought from them is the squeezy-cap system (should be on the bottom-right of this page). Do your own investigating to see if this is worth it to you, but for me, it's beautiful. The inks are formulated to match the quality and consistency of Canon's, and with the bottles I bought, I should be able to fill my cartridges about 3 dozen times for the same price of 1 new set from Canon. Precision Colors also has adjusted color-profiles you can download if you're crazy about getting everything perfectly consistent. For my uses, their inks work perfectly well with the default Canon settings.

The Pro 100's print quality and ease of operation are also big plusses. Coming from the Brother, I expected some amount of fiddling would be necessary for my bristol sheets, but much to my surprise, I've not had a single battle in a month of regular use. I can load up a fat stack of bristol sheets, hit print on a batch of pages in Manga Studio, and the printer just does its thing, no lip given, no jams, no misaligned images (knock on wood). The bristol feeds through automatically. I also used the printer for some art prints at a recent convention, using the provided 13"x19" photo paper, and the results were stellar. As good or better than anything I've received from a print shop, even on the standard quality mode. Its borderless  printing feature is also useful for art prints, or just getting the biggest working area possible onto my bristol board. The printer's wifi capable too, so I can sit at my desk/couch with the Cintiq Companion and print stuff off any time, without having to hook anything up. A pretty standard perk for a modern printer, but still very nice.

So far, I've printed about 30 pages of Batman '66 pencils, a couple watercolor underdrawings (I've gone right over the ink lines without much bleeding), maybe 10 convention art prints, some smaller photos, and a handful of other things (last minute valentine). I'm very pleased with the Pro 100 in all aspects. If you have limited space, that's a consideration, as it really is large and heavy. Otherwise, go snag one from Adorama, or wherever has the best price, and print yourself silly.

My crappy cell phone camera can't do these justice- but look at the size of that Caspar David Friedrich! Borderless goodness.

Original Art for Survivors

start copy

sarc

Today begins a new partnership with some people I really admire. Here's the plan:

Every month, I'm donating a portion of my original art sales to SARC (The Sexual Assault Resource Center), my favorite local nonprofit serving survivors of sexual exploitation and violence. This month, I've already contributed $535 out of a possible $1,000. For December, I'll do the same, up to $1,000. Whether it's a couple pages of Batman, a color cover, whatever, the first $1,000 goes to SARC. Pretty simple. I'll start with this model and see how it goes. My intent is to raise funds and awareness for their work throughout next year.

Browse my Original Art section here.

(UPDATE: In less than 24 hrs, I've met my goal of $1,000 raised for SARC. Thank you!!!)

SARC's been around since 1977 (they're featured in this year's Willamette Week Give! Guide). Begun by two assault survivors, its staff works in the Portland metro area with a current caseload of almost 300 kids at risk for sex trafficking. It's the same population the National Center for Missing and Exploited Children talks about when they quote stats like this:

Every year in America, there are between 100,000 and 300,000 children at risk of being sold on the sex-slave market. The average age of the victims is between 12 and 14.

Globally, human trafficking is the #2 most profitable illegal business; just ahead of weapons and just behind drugs. It's really difficult to let that sink in. I'll leave it to you to follow the sources below if you want detailed information; suffice to say, I can't think of an issue that needs more support, and has less. Nationally, there are fewer than 100 beds in treatment facilities equipped to help heal and care for these kids. One of the social workers at SARC said that for every girl they take on, that girl can name six or seven others being actively prostituted. It's staggering. Nonprofits like SARC are on the front lines providing care, services, and protection, but they're hugely under-supported, especially from your average American guy (hello).

I've supported SARC financially for a few years through the Epik Project, and I want to do more. Because of who I am and what I do (an artsy guy with limited real-world skills), my options for helpful involvement are limited. This also just isn't a topic that comes up naturally in any social setting. Believe me. I've tried. Taking stock of my options to do more, I landed on art sales. Original art income is totally unpredictable; I can't depend on it to pay bills, but I can use it strategically. It's a natural fit for donation.

If this all seems a little bizarre and non sequitur coming from a comics creator, have a look at this: other cartoonists like Lora Innes and Crystal Yates are already at work on this issue. Their organization, Comics Creators for Freedom, has already raised over $20,000 to assist survivors. They've set their latest fundraiser for December 2013- it's inspiring stuff.

If you want more info on human trafficking, check these out:

Government info pages/resources

Nonprofits on the front lines (some local to me)

Donate directly to SARC here: 

 

 

Batman '66 Original Art - #1 Variant Cover and More

Batman 66 Launch Art Previews Variant

I just listed all my remaining pages of Batman '66 #1 on my original art section, including something special:

This is the series' launch art, also used as the cover for Previews (May, 2013), one of the two variants for issue #1, and who knows what else. Seems like it was everywhere for a couple months. Also up for sale are a few of my favorite pages featuring Julie Newmar Catwoman kicking Frank Gorshin Riddler's butt. Check 'em out.

Speaking of Batman '66, Jeff Parker just sent me script, so I'm officially on board another 30 page installment. I start layouts next week! It's going to be packed with everyone's favorite villains, celebrity cameos, the works. I can't wait to get under way.

If you'd like to purchase any of the listed art (or even something I haven't listed yet), drop me a line on the Contact page.

Batman '66 Original Art For Sale

 

Batman '66 Original Art

What a lovely Wednesday morning.

Last night at midnight, two things went live: My last Batman '66 story of the year (Mad Hatter Part 2) and a new sales section for original art, with the first few pages of Batman '66 Issue 1It looks like the first two of six sold while I slept, so cheers to all you Bat-fans. I've had tremendous interest in the original art for this series, but it's taken me a while to feel alright parting with the art. It's sort of become one of my babies.

Batman '66 Mad Hatter Part 2

All that said, I'm excited to share some of this terrific book with you. I'll post more pages throughout the next couple months while I start my next graphic novel for Dark Horse (Yes!)--- then it's back to Batman '66 in November, and more exciting developments in the new year. If it sounds like I'm pleased... I am.

Also, Rose City Comic Con's coming up fast! I'll be there, next to everyone's favorite down-home mastermind and Batman writer, Jeff Parker. I'll bring more original art, and will be taking commissions too (already filling up my queue, so contact me to get a spot early, just in case).

Happy Wednesday, everyone! I hope you enjoy today's Batman, or as my baby girl calls it, 'That-man and Christopher Robin'.

Siren Serenades Batman, Out Today

Siren  

The latest Batman '66 #6 is out today, and even though it's not digitally super-enhanced and sort of bears the mark of the beast, it does have some of my best work on the series. I hand-painted a few pages where things get really trippy, and writer Jeff Parker really outdid himself in giving me craaaaaaazy fun stuff to draw this time. It's my personal favorite so far.

At Comixology for 99 cents.

Batman '66 Week Starts Now

Batman '66It's BAT WEEK, boys and girls! Batman '66 #1 (part 1 of 3) goes on sale in a digital enhanced edition this Wednesday, and to make with the pomp and circumstance, the NY Post is running a series of articles and blog posts detailing the project. Today, there's an interview up with me, Jeff Parker (writer), and Mike Allred (cover artist), and another post with some general info. Coinciding with '66's release is an announcement from Comixology that comics like this will now be available on a subscription basis. Pretty cool option for a weekly series.

I'll try to put up some behind-the-scenes material as the week progresses. For now, head over the NY Post to catch some freshly revealed artwork!

Hope you dig it.

Batman '66 Plane

Holy Retro Batman Announcement

Batman  

Today I get to announce some really fun news. Really. Fun. Comics. News. My studio-mate and fellow lover of retro, Jeff Parker, is set to write a new series of Batman comics for DC, and I'll be performing art duties for the first three stories, from layouts to color.

This isn't just any Batman though. This is the Adam West Batman, the Batusi Batman, the Julie Newmarriffic Batman. DC licensed the rights to all the actors from the 60s TV show (!), and we're set to start reeling and rocking this summer. Really, if they let me develop with any superhero project, working with whoever I wanted, I honestly couldn't have come up with a better fit: lighthearted, kid-appropriate, retro, and written by one of my favorite comics writers. The script Jeff's writing for this series is gold. You can feel his love the material, the era, the Julie Newmar.

DC announced the project last night at an event in Los Angeles. Mr. West appeared for a signing with the original Batmobile, a replica of the Bat Cave... even Batman cupcakes. Here's the press release. You can see a glimpse of my art at like, 4:13.

BATMAN CUPCAKES.

I really don't need to say more than that.

Julie Newmar Catwoman

If you want more info on all this, head over to DC's site (I think they have a bunch of 60s Bat-stuff they're announcing), or Jeff's blog. As for me, I'm going to start some layouts.

Holy happy circumstance.